Target stopped receiving commands on remote PC last week

Using HotkeyNet with Dark Age of Camelot.

Target stopped receiving commands on remote PC last week

Postby vrelies on Thu Apr 26, 2012 12:02 am

hkn works fine on main pc but the other pc it says connected but no commands are going through. usually it has lines of text when im casting... but nadda. checked firewalls etc. was working fine last week.


build 208
vrelies
 
Posts: 9
Joined: Wed Apr 25, 2012 11:53 pm

Re: Target stopped receiving commands on remote PC last week

Postby HotkeyNet on Thu Apr 26, 2012 12:10 am

vrelies wrote:hkn works fine on main pc but the other pc it says connected but no commands are going through. usually it has lines of text when im casting... but nadda. checked firewalls etc. was working fine last week.

Do you mean that when your finger presses a hotkey on the local PC:

1. You see a message on the local PC saying that a command is being sent to the remote PC

2. But on the remote PC, there is no message about that command?

In that case the two PCs aren't connected. That might happen because your router reassigned IP addresses.

Start both HotkeyNets from scratch and read ALL the messages on BOTH of them about connecting.
-- Freddie
HotkeyNet
Site Admin
 
Posts: 5684
Joined: Fri Mar 28, 2008 8:36 pm

Re: Target stopped receiving commands on remote PC last week

Postby vrelies on Thu Apr 26, 2012 12:12 am

pretty much it.

i checked what ip address it was to double check it didnt change cause it changes sometimes.

also it said connected in green letters on remote pc. just nothing spamming as far as commands or anything. just sits there
vrelies
 
Posts: 9
Joined: Wed Apr 25, 2012 11:53 pm

Re: Target stopped receiving commands on remote PC last week

Postby HotkeyNet on Thu Apr 26, 2012 12:14 am

vrelies wrote:also it said connected in green letters on remote pc. just nothing spamming as far as commands or anything. just sits there

Start both HotkeyNets from scratch and read all the messages on both of them about connecting.[/quote]
-- Freddie
HotkeyNet
Site Admin
 
Posts: 5684
Joined: Fri Mar 28, 2008 8:36 pm

Re: Target stopped receiving commands on remote PC last week

Postby vrelies on Thu Apr 26, 2012 12:16 am

u mean re download hkn and redo scripts etc?

i tried a newer ersion of hkn and it didnt work at all. that was a while abck though maybe a year
vrelies
 
Posts: 9
Joined: Wed Apr 25, 2012 11:53 pm

Re: Target stopped receiving commands on remote PC last week

Postby HotkeyNet on Thu Apr 26, 2012 12:24 am

No, I mean close the programs (make them exit, not just minimize), then start them running again. When they start running each of them displays several messages about the process of connecting to each other. If they are really connected, the messages will look like what I pasted below.

You need to see "This connection is now validated" on both computers. If you don't see it on both computers, they aren't connnected.

Code: Select all
Sent challenge to 192.168.1.102

Received challenge from 192.168.1.102
   Passwords and versions match, but must be confirmed by response.

Sent response to 192.168.1.102

Received response from 192.168.1.102
   This connection is now validated.
-- Freddie
HotkeyNet
Site Admin
 
Posts: 5684
Joined: Fri Mar 28, 2008 8:36 pm

Re: Target stopped receiving commands on remote PC last week

Postby vrelies on Thu Apr 26, 2012 12:28 am

it said its validated.

when i hit the main pc say button 5, it would say that on the other pc. not now.
vrelies
 
Posts: 9
Joined: Wed Apr 25, 2012 11:53 pm

Re: Target stopped receiving commands on remote PC last week

Postby vrelies on Thu Apr 26, 2012 12:40 am

21:37:18:
Disabling foreground lock.
21:37:18: Foreground lock successfully disabled.
21:37:18: Foreground lock timeout is now 0.
21:37:18:
Setting maximum timer resolution.
21:37:18: System timer resolution has been set to 1 ms.
21:37:18:
Received challenge from 192.xxxx
21:37:18: Passwords and versions match, but must be confirmed by response.
21:37:18:
Sent challenge to 192.xxxx
21:37:18:
Sent response to 192.xxxx
21:37:18:
Received response from 192.xxxx
21:37:18: This connection is now validated.
21:37:18:
Loading script C:\Users\akemi\Desktop\hk 2\ctr r.rtf.
21:37:18:
vrelies
 
Posts: 9
Joined: Wed Apr 25, 2012 11:53 pm

Re: Target stopped receiving commands on remote PC last week

Postby HotkeyNet on Thu Apr 26, 2012 12:59 am

Does it say "validated" on both PCs?
-- Freddie
HotkeyNet
Site Admin
 
Posts: 5684
Joined: Fri Mar 28, 2008 8:36 pm

Re: Target stopped receiving commands on remote PC last week

Postby vrelies on Thu Apr 26, 2012 1:05 am

yep. as soon as i connect remote pc the main says valid and the other says valid too
vrelies
 
Posts: 9
Joined: Wed Apr 25, 2012 11:53 pm

Next

Return to Dark Age of Camelot

Who is online

Users browsing this forum: No registered users and 2 guests

cron